JMT Honda debriyaj sensörü

check TL Üzeri Alışverilerde Ücretsiz Gönderim
check Şimdi Satın Alın! 30 Gün Sonra Ödeyin
check Toptan Satış Alanı - B2B
Kimlik No: 4833

JMT Honda debriyaj sensörü

₺280,40 KDV Hariç

Diğer Müşterilerimiz Ayrıca Şunu Satın Aldı

Tutkunuzun Peşinde İlerliyoruz!

Karar vermek için 14 gününüz var

JMT debriyaj sensörü

[opis_ogolny]
  • OEM ürünü için yüksek kaliteli yedek
  • debriyaj koluna takılı
  • Arızalı bir sensör esas olarak motor vitesteyken çalıştırma zorluklarına neden olur

Uyumludur

Ürün Hakkında Yorumlar

4.75
4 Müşteri Yorumu
  • 5
  • 4
  • 3
  • 2
  • 1

4 Uygun Müşteri Yorumu Bulduk.

    ofileanu

    Güvenilir müşteri görüşü

    6 ay önce

    Foarte multumit a venit exact ce am comandat intr-un timp destul de scurt un pic cam scump transpurtul dar recomand.

    Otomatik Çeviri

    ofileanu

    Güvenilir müşteri görüşü

    6 ay önce

    JMT Honda debriyaj sensörü

    Foarte multumit a venit exact ce am comandat intr-un timp destul de scurt un pic cam scump transpurtul dar recomand.

    Otomatik Çeviri

    Łukasz

    Güvenilir müşteri görüşü

    2 yıl önce

    Sprawy, przewodzi prąd. Jednak nie pasuje do modelu GL1000 K1 z 1976 r. gdyż ma większą średnicę niż oryginał (fabryczny) i nie wejdzie w otwór w obsadzie klamki. Oryginalny mimo uszkodzenia musiałem rozebrać i udało się naprawić. Być może ten będzie pasował do podanego GL1000 78-79 ale to już sprawdzę kiedy oddam go koledze. Dobrze by było aby na elementach...

    Otomatik Çeviri

    Łukasz

    Güvenilir müşteri görüşü

    2 yıl önce

    JMT Honda debriyaj sensörü

    Sprawy, przewodzi prąd. Jednak nie pasuje do modelu GL1000 K1 z 1976 r. gdyż ma większą średnicę niż oryginał (fabryczny) i nie wejdzie w otwór w obsadzie klamki. Oryginalny mimo uszkodzenia musiałem rozebrać i udało się naprawić. Być może ten będzie pasował do podanego GL1000 78-79 ale to już sprawdzę kiedy oddam go koledze. Dobrze by było aby na elementach na zdjęciu były naniesione podstawowe wymiary aby sprawdzić czy będzie to nam pasować.

    Otomatik Çeviri

    Johan

    Güvenilir müşteri görüşü

    6 yıl önce

    For my Hondas FT 500 (1983) & XBR 500 (1986) as spares. Remove the lever first, then punch out the old one from the contact pins side; it's an easy, light press fit. When pressing in the new one, align the hook on the switch with the notch in the clutch lever body. Note the hole in the switch also lines up with a hole at the underside of the alu body; it's f...

    Otomatik Çeviri

    Johan

    Güvenilir müşteri görüşü

    6 yıl önce

    JMT Honda debriyaj sensörü

    For my Hondas FT 500 (1983) & XBR 500 (1986) as spares. Remove the lever first, then punch out the old one from the contact pins side; it's an easy, light press fit. When pressing in the new one, align the hook on the switch with the notch in the clutch lever body. Note the hole in the switch also lines up with a hole at the underside of the alu body; it's for contact spray when needed. (Better use it before needed; once corroded the inner contact becomes difficult).

    Otomatik Çeviri

    Marek

    Güvenilir müşteri görüşü

    9 yıl önce

    Honda cb750k

    Otomatik Çeviri

    Marek

    Güvenilir müşteri görüşü

    9 yıl önce

    JMT Honda debriyaj sensörü

    Honda cb750k

    Otomatik Çeviri